Part Number Hot Search : 
3329S502 HPR105W M68Z128 58M08 2SK29 SPD6631 CA0339M MM1663C
Product Description
Full Text Search
 

To Download RF300 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 RF & MICROWAVE
SERIES
HIGH REPEATABILITY BROADBAND TO-5 RELAYS DPDT
SERIES DESIGNATION RF300 RF303 Repeatable RF relay Sensitive, repeatable RF relay RELAY TYPE
RF300 RF303
INTERNAL CONSTRUCTION
PERFORMANCE FEATURES The ultraminiature RF300 and RF303 relays are designed to provide improved RF signal repeatability over the frequency range. These relays are highly
UPPER STATIONARY CONTACT MOVING CONTACT
UNI-FRAME
suitable for use in attenuator and other RF circuits, the RF 300 and RF303 feature:
ARMATURE LOWER STATIONARY CONTACT
* High repeatability. * Broader bandwidth. * Metal enclosure for EMI shielding. * Ground pin option to improve case grounding. * High isolation between control and signal paths. * Highly resistant to ESD. CONSTRUCTION FEATURES The following unique construction features and manufacturing techniques provide excellent resistance to environmental extremes and overall high reliability.
ENVIRONMENTAL AND PHYSICAL SPECIFICATIONS
-65C to +125C Temperature Storage (Ambient) Operating -55C to +85C Vibration (General Note 1) Shock (General Note 1) Enclosure RF300 Weight RF303 (c)2003 TELEDYNE RELAYS 0.16 oz. (4.5g) max. 10 g's to 500 Hz 30 g's, 6 msec, half-sine Hermetically sealed 0.09 oz. (2.55g) max.
* Uni-frame motor design provides high magnetic efficiency and mechanical rigidity. * Minimum mass components and welded construction provide maximum resistance to shock and vibration. * Advanced cleaning techniques provide maximum assurance of internal cleanliness. * Gold-plated precious metal alloy contacts ensure reliable switching. * Hermetically sealed. * Solderable leads.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE www.teledynerelays.com
RF300 RF303 Page 26
RF300 RF303/1203/Q1
RF & MICROWAVE
SERIES RF300 AND RF303 TYPICAL RF CHARACTERISTICS (See RF Notes)
Isolation Across Contacts (RF Note 4)
0 0
Isolation Pole to Pole (RF Note 5)
-10
-10
Isolation (dB)
-30
Isolation (dB)
-20
-20
-30
-40
-40
-50
-50
-60 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000
-60 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000
Frequency (MHz)
Frequency (MHz)
Insertion Loss (RF Note 6)
0 2.0
VSWR (RF Note 6)
-0.2
Insertion Loss (dB)
1.8
-0.4
VSWR
1.6
-0.6
1.4
-0.8
1.2
-1 0
1.0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000
Frequency (MHz)
Frequency (MHz)
RF300 Time Response (RF Note 6)
1.1 0.9 90% 0.7
37ps reference
Volt
0.5 0.3 0.1 -0.1 -100
62.3ps propagation delay time 51.1ps pulse rise time
10%
0
100
200
300
400
500
600
700
800
900
Time (ps)
RF NOTES
1. Test conditions: a. Fixture: .031" copper clad, reinforced PTFE, RT/duroid(R) 6002 with SMA connectors. (RT/duroid(R) is a registered trademark of Rogers Corporation.) b. Room ambient temperature. c. Terminals not tested were terminated with 50-ohm load. d. Contact signal level: -10 dBm. e. No. of test samples: 4. Data presented herein represents typical characteristics and is not intended for use as specification limits. Data is per pole, except for pole-to-pole data. Data is the average from readings taken on all open contacts. Data is the average from readings taken on poles with coil energized and de-energized. Data is the average from readings taken on all closed contacts. Test fixture effect de-embedded from frequency and time response data.
2. 3. 4. 5. 6. 7.
RF300 RF303 Page 27
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE www.teledynerelays.com
(c)2003 TELEDYNE RELAYS
RF300 RF303/1203/Q1
RF & MICROWAVE
SERIES RF300 AND RF303 RF REPEATABILITY PERFORMANCE (See RF Notes 1, 2 and 3) 1 million cycle repeatability
0.12 0.10 .080 dB .060 .040 .020 0 1 2 3 4 5 6
6
0.1 dB from DC to 3GHz
Typical repeatability of attenuation during life (normally open contacts)
MAX X MIN.
7
8
9
10
Number of cycles X10
0.12 0.10 .080 dB .060 .040 .020 0
Typical repeatability of insertion loss during life (normally closed contacts)
MAX X MIN.
1
2
3
4
5
6
6
7
8
9
10
Number of cycles X10
RF NOTES
1. One million cycle repeatability data is based upon 396 observations with an average repeatability 0.033 dB and a range of 0.093 dB. 2. Repeatability of attenuation values were obtained from tests conducted in a 20 dB attenuator network with a 0 dBm input signal. 3. Relay operates at frequencies higher than 3 GHz with reduced RF performance characteristics. 4. Curves were developed from tests performed on a 0.031" copper clad, reinforced PTFE circuit board at 20C (ref). The unutilized contacts were terminated in 50 ohms; characteristic impedance of measuring equipment is 50 ohms. The relays were mounted flush to the circuit board ground plane without the relay header soldered to the ground plane.
(c)2003 TELEDYNE RELAYS SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE www.teledynerelays.com RF300 RF303 Page 28
RF300 RF303/1203/Q1
RF & MICROWAVE
SERIES RF300 AND RF303 GENERAL ELECTRICAL SPECIFICATIONS (@25C)
Contact arrangement Rated duty Contact resistance Contact load rating Contact life rating Coil operating power Operate time RF300 RF303 RF300 RF303 2 Form C (DPDT) Continuous 0.15 ohm max. initial (measured 1/8" from the header) Resistive: 1Amp/28Vdc Low level: 10 to 50 A, 10 to 50 mV 10,000,000 cycles typical at low level RF300: 450 mW typical @ nominal rated voltage RF303: 200 mW typical @ nominal rated voltage 4.0 ms. max. 6.0 ms. max. 3.0 ms. max. 3.0 ms. max. 0.4 pF typical 1,000 M min. (between mutually isolated terminals) 350 VRMS / 60 Hz @ atmospheric pressure
Release time Intercontact capacitance Insulation resistance Dielectric strength
DETAILED ELECTRICAL SPECIFICATIONS (@25C)
BASE PART NUMBERS Coil voltage, nominal, VDC RF300 Coil resistance, ohms 20% RF303 Pick-up voltage max, VDC 100 3.6 850 9.0 RF300-5 RF303-5 5.0 50 RF300-12 RF303-12 12.0 390
OUTLINE DIMENSIONS
GENERAL NOTES
1. Relays will exhibit no contact chatter in excess of 10 sec or transfer in excess of 1 sec.
RF300 RF303 Page 29
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE www.teledynerelays.com
(c)2003 TELEDYNE RELAYS
RF300 RF303/1203/Q1


▲Up To Search▲   

 
Price & Availability of RF300

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X